ROUGH-TEX PLATFORM DIVING
SURFACE INFORMATION

• BLACK: General Purpose SBR Rubber
• TAN: Pure Gum Rubber

• 2-Ply: High Strength Synthetic Fabric x Bare Bottom – 150 Pound Tension Rating
• 3-Ply Black: High Strength Synthetic Fabric x Bare Bottom – 225 Pound Tension Rating
• 3-PlyTan: Treated All Synthetic Fabric x Bare Bottom – 225 Pound Tension Rating

• 2 Ply Black: 9/32 - inch
• 2 Ply Tan: 17/64 - inch
• 3 Ply: 21/64 - inch

To determine approximate weight, multiply width (in inches) x P.I.W. x length (in feet)

• 2 Ply 0.092
• 3 Ply 0.117

  Example: How much would a piece of 2-Ply Black Rough-tex weigh that is four feet wide and 20 feet
  Long? ANSWER: (48 inches wide) x (0.092 P.I.W.) x (20 feet long) equals approximately 88 lbs.

• -40 Degrees Fahrenheit – 250 Degrees Fahrenheit

• Use a good contact cement such as 3M 1300 or 1357
• Must have a good clean surface with no paint.
• Scuff the surface of the concrete before gluing to gain extra surface area to cement.
• Use an edge-sealing compound (to seal the edges)

Another good attachment product is Mondo PU100 2-part urethane adhesive.

2-Ply Black Rough-tex is made in the USA.
3-Ply Black Rough-tex is imported.

* * * * * * * * * * * *

Best wishes for a safe and successful diving season!