| PRODUCT THICKNESS:
|
5/16 Inch |
| COVERS:
|
Rough-top x FS |
| CARCASS (Backing):
|
28 oz. Cotton |
| WORKING TENSION
PER INCH WIDTH: |
90 lbs. |
| APPROX. WEIGHT
LBS. PER INCH WIDTH: |
.118 lbs. (**
See Below) |
| MINIMUM PULLEY: |
2 1/2 Inch |
| TEMPERATURE
RANGE: |
-40 – 250 F |
| CLIPPER LACE:
#1 |
#1 |
| ALLIGATOR LACE:
#1 |
#7 |
| ALLIGATOR STAPLE:
#125 |
#125 |
Application: Highly
popular in the industry. The 28 oz.
Plies give a hefty appearance and
a cushioning effect. Because backing
is made of cotton, installer must
insure that a good seal is in effect
on all edges to prevent water from
seeping under material over time.
**To
determine approximate weight,
multiply width (in inches) x 0.118
x length (in feet)
RECOMMENDED METHOD OF ATTACHMENT:
-
Use good contact
cement such as 3M 1300 or 3M 1357
(available at industrial supply
stores).
-
Must have good,
clean surface with NO PAINT.
-
Scuff or “scarify”
the concrete before adhering to
gain extra surface area to adhesive.\
- Use an edge-sealing compound
(to seal edges). Be sure to add
weight to the edges after applying
to help form the seal.
Another excellent product (although
more expensive) is Mondo PU105 Polyurethane
Adhesive.
|
